Skip to main content

Detecting Radiation

Although many radioactive materials are silver-colored, metallic solids in their pure state, they can vary in color and exist in different physical states, including liquids and gases. They are also physically indistinguishable from other (nonradioactive) metals. In addition, ionizing radiation is not detectable by one's senses. It cannot be seen, heard, smelled, tasted, or felt. For these reasons, simple visual inspection is insufficient to identify radioactive materials, and radiation sources can be virtually impossible to recognize without special markings. To address these problems, scientists have developed the following four major types of instruments to detect and identify radioactive materials and ionizing radiation:

  • Personal Radiation Detector (PRD)
  • Handheld Survey Meter
  • Radiation Isotope Identification Device (RIID)
  • Radiation Portal Monitor (RPM)

Personal Radiation Detector (PRD)

A PRD is a wearable gamma and/or neutron radiation detector, approximately the size of a pager. When exposed to elevated radiation levels, the device alarms with flashing lights, tones, and/or vibrations. Most PRDs numerically display the detected radiation intensity (on a scale of 0 to 9) and, thus, can be used to locate a radiation source; however, they typically are not as sensitive as handheld survey meters and cannot identify the type of radioactive source.

Handheld Survey Meter

As the name implies, the survey meter is a handheld radiation detector, which typically measures the amount of radiation present and provides this information on a numerical display in units of counts per minute, counts per second, or micro roentgen (µR) or microrem (µrem) per hour. Most of these devices detect beta and gamma radiation only. However, some models can detect alpha, beta, gamma, and/or neutron radiation emitted from radioactive materials.

One particular meter, known as a teletutor, is specifically designed to detect gamma and x-ray radiation. Named for its "telescoping" ability, this device can be extended to about 4 meters (13 feet) to measure very high dose rates without subjecting the user to unnecessary exposure. In addition, these devices typically have the ability to measure dose rates ranging from 0 to 1,000 rad per hour.

Radiation Isotope Identification Device (RIID

A RIID is a radiation detector with the ability to analyze the energy spectrum of radiation, in order to identify the specific radioactive material (radionuclide) that is emitting the radiation. In addition, these devices can be used as survey instruments to locate radioactive material.

Radiation Portal Monitor (RPM)

An RPM is a large pass-through radiation monitor (or "portal") for personnel, vehicles, container boxes, or trains. Typically, these devices consist of two pillars containing radiation detectors, which are remotely monitored from a display panel. These monitors alarm to indicate the presence of radioactive materials, including low-radiation materials like uranium.

For More Information: https://www.usnuclearcorp.com


Labels:

Comments

Post a Comment

Popular posts from this blog

Autonomous Airborne Radiation Monitoring system

Complete UAV radiation mapping drone system US Nuclear UAV radiation mapping drone offers an accurate, affordable and versatile low-altitude aerial radiation detection vehicle which is an out of the box solution for anyone that needs to examine an area or patrol a location for radiation levels or contamination. The system gives you real-time location, measurement and mapping of radioactivity with isotope identification. UAV radiation and mapping drone: what do you get 1. Aerial unmanned drone A Small Unmanned Aircraft System (SUAS) with an all up weight less than 7.0 kg. This low total mass, coupled with the in-built redundancy of the aerial system represents a low risk of structural damage to buildings and the environment during its operation. This is in line with UK CAA guidelines. The drone has a number of supporting sensor: positioning fixing (Latitude and Longitude) by multi GNSS (GPS and Glonass), number of satellites and height above mean sea level (AMSL); tem...
Post a Comment
Read more

NGM 202L™ (Gas Monitor)

The NGM 202L monitor continuously measures the volumetric activity of noble gas and tritium in a radioactive effluent gaseous samples. FEATURES: Dynamic gamma radiation compensation Compact and reliable Minimum periodic maintenance DESCRIPTION: The NGM 202L monitor forms part of the RAMSYS™ product line. It has been developed to continuously sample the volumetric activity of noble gas and tritium in a radioactive effluent gaseous sample. This monitor can operate as a stand alone device or in conjunction with a particulate monitor (ABPM 201™ monitor), iodine monitor (IM 201™ monitor) and with a high range noble gas monitor (NGM 203™ monitor) to form a very wide range monitoring system. For More Information: usnuclearcorp.com
Post a Comment
Read more

Determining the Source of Stream Toxins with Continuous Monitoring

Determining Stream Toxins with Water Quality and Level Data When researcher Wesley Gerrin gained access to a sediment toxicity lab in the Experimental Forest on the University of Georgia campus, he wanted to investigate an on-campus lake for any potential contamination issues. After his research was completed, he was fortunate enough to have some extra grant funding for the addition of a few samples from any location on campus, so he chose one of the most exciting sites on the University premises: Tanyard Branch. As Wesley said, “We ran the tests, and everything looked good, except for Tanyard Branch.” Tanyard Branch has been one of the most heavily monitored creeks in the Athens-Clarke County area for the last couple of decades due to contamination - it has a long history of abuse beginning in the 1700s. Native Americans long used the area as hunting and fishing grounds, but it was eventually seized by colonists. The people who then settled into the area opened botanical gard...
Post a Comment
Read more